My Cart

A leader in office supplies

Offer professional guidance and supporting

Label Tape/Dymo/

Holybro Pixhawk Jetson Baseboard

$ 91.38

Holybro Pixhawk Jetson Baseboard Baseboard Description The Holybro Pixhawk Jetson Baseboard is based on the Pixhawk Autopilot Bus open source specification and the NVIDIA Jetson Orin NX/Nano Carrier Board. The Pixhawk Autopilot Bus (PAB) Form Factor enables this to be used with any PAB flight controller such as the Pixhawk 6X. Baseboard Port & Connection Jetson Connectors 2x Gigabit Ethernet port Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S) 8-pin JST-GH RJ45 2x MIPI CSI Camera Inputs 4 Lanes each 15-Pin Raspberry Pi Cam FFC 2x USB 3.0 Host Port USB A 5A Current Limit 2x USB 2.0 Host Port 5-Pin JST-GH 0A Current Limit USB 2.0 for Programming/debugging USB-C 2 Key M 2242 for NVMe SSD PCIEx4 2 Key E 2230 for WiFi/BT PCIEx2 USB UART I2S Mini HDMI Out 4x GPIO 6-pin JST-GH CAN Port Connected to Autopilot’s CAN2 (4 Pin JST-GH) SPI Port 7-Pin JST-GH I2C Port 4-Pin JST-GH I2S Port 7-Pin JST-GH 2x UART Port 1 for debug 1 connected to Autopilot’s telem2 Fan Power Port IIM42652 IMU Input Power XT30 Connector Voltage Rating: 7V-24V (3S-4S) Separate input power circuits than the Autopilot to ensure flight safety Holybro UBEC can be used for application above 4S Note: The Pixhawk Jetson Baseboard has an integrated UBEC to convert 7V-24V to 5.5V for the Jetson. Using an external UBEC alongside the integrated one provides redundancy and easier replacement in case of BEC failure. Power Requirements 8V/3A Minimum Depends on Usage and Peripherals Autopilot Connectors Pixhawk Autopilot Bus Interface 100 Pin Hirose DF40 50 Pin Hirose DF40 Redundant Digital Power Module Inputs I2C Power Monitor Support 2x – 6 Pin Molex CLIK-Mate Power Path Selector w/ Overvoltage Protection Voltage Ratings: Max input voltage: 6V USB Power Input: 4.75~5.25V Full GPS Plus Safety Switch Port 10-Pin JST-GH Secondary (GPS2) Port 6-pin JST-GH 2x CAN Ports 4 Pin JST-GH 3x Telemetry Ports with Flow Control 2x 6-Pin JST-GH 1 is connected to Jetson’s UART1 Port 16 PWM Outputs 2x 10-Pin JST-GH UART4 & I2C Port 6-Pin JST-GH 2x Gigabit Ethernet port Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S) 8-pin JST-GH RJ45 AD & IO 8-Pin JST-GH USB 2.0 USB-C 4-pin JST-GH DSM Input 3-pin JST-ZH 1.5mm Pitch RC in PPM/SBUS 5-pin JST-GH SPI Port External Sensor Bus (SPI5 11-Pin JST-GH 2x Debug Port 1 for FMU 1 for IO 10-Pin JST-SH Dimensions (Without Jetson and Flight Controller Module) 126x80x38mm Weight With Jetson, Heatsink, Flight Controller, M.2 SSD, M.2 Wi-Fi Module 203.2g Follow us World Drone Market on our YouTube to view more about the Holybro Pixhawk Jetson Baseboard.
Categories: ,

Detail – 10 pack 16952 black on clear tape is compatible with Dymo letratag refills clear transparent plastic label refills. This thermal Non-laminated clear label maker tape 16952 measures 1/2 Inch W x 13ft L

Features – The replacement compatible for Dymo label maker refills clear 16952 has good adhesive and no sticky residue after removal. And this label maker refill clear 16952 is resistant to water, abrasion, temperature and will not smear or smudge

Machines – This clear tape is compatible with machines that use 12mm clear Letratag label refills. Such as LetraTag LT100H, LetraTag LT100H Plus, LetraTag LT100T, LetraTag LT110T, LetraTag QX 50, LetraTag 2000, LetraTag XR, LetraTag XM, LetraTag QR

Application – This letra tag refills clear label maker refill is self-adhesive. LT clear lable tape 12mm x 4m an economical choice for office, home, school and other indoor use. The back of the clear labels 16952 is split which makes it easy to peel and apply to common surfaces

Package – The replacement compatible for Dymo label maker refills clear have been tested multiple times. To ensure the condition of the product, please store unused clear label tape at normal room temperature and out of direct sunlight